oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 820-sl70.0m-06 70.0 mhz if saw filter 5.6 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 820-sl70.0m-06 january 2011 rev a 70.0 mhz if saw filter 5.6 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a input e output test fixture & values input l1=tbd q > 40, c1=tbd output l2=tbd q > 40, c2=tbd source/load impedance 50 ?
oscilent part number 820-sl70.0m-06 january 2011 rev a 70.0 mhz if saw filter 5.6 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.8 70.0 70.2 insertion loss at fo db - 8.2 9.0 temperature coefficient ppm/c - -94 - amplitude ripple variation at fo 2.1 mhz db p-p - 0.7 1.0 group delay variation at fo 2.0 mhz nsec - 110 150 absolute delay at fo sec - 0.85 - in/out return loss at fo db - - - bandwidth at ?1.0 db mhz 5.2 5.6 - bandwidth at ?3.0 db mhz 6.0 6.5 - bandwidth at ?40.0 db mhz - 9.5 10.0 relative attenuation: from 10 to 64.5 mhz db 40 45 - from 75.5 to 140 mhz db 40 43 -
oscilent part number 820-sl70.0m-06 january 2011 rev a 70.0 mhz if saw filter 5.6 mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|
